Medium Power Solid-State - 50 Ohm RF Switches

Home / RF Switches / Medium_Power_Solid-State-50 Ohm

JFW's online 50 Ohm medium power solid-state RF switch models are listed in the table below. The medium power RF switch specifications are sortable for easy model selection.

If you can't find a standard 50 Ohm medium power solid-state RF switch model to meet your requirements, please contact JFW at sales@jfwindustries.com.

JFW has been designing, manufacturing, and delivering high power RF switches for over 20 years. With our extensive line of medium power solid-state RF switch models, JFW has solutions to fit your specific medium power coaxial switch applications. If you need a coaxial T/R switch for medium power hot switching, JFW's solid-state medium power switches have the proven reliablitiy that you demand.

Inquiry Form

FAQs

Click the column headers to sort our online models. For your specific application, please contact JFW for assistance.

JFW Model #	Switch Config.	Switch Type	Frequency Start	Frequency Stop	Switching Speed	RF Inuput Power	Isolation	Control Logic	Documents	Buy or Quote
50S-0713	1P4T	Absorptive	20 MHz	100 MHz	8 uS	20 Watts	55 dB	TTL	Specs Drawing	Quote
50S-1463	1P2T	Reflective	10 MHz	1000 MHz	40 uS	30 Watts	50 dB	TTL	Specs Drawing	Quote
50S-1505	1P2T	Reflective	20 MHz	2500 MHz	10 uS	25 Watts	45 dB	TTL	Specs Drawing	Quote
50S-1841	1P2T	Reflective	500 MHz	3000 MHz	10 uS	30 Watts	65 dB	TTL	Specs Drawing	Quote
50S-1872	1P2T	Reflective	20 MHz	500 MHz	10 uS	5 Watts	50 dB	TTL	Specs Drawing	Quote
50S-1873	1P2T	Reflective	800 MHz	2200 MHz	12 uS	15 Watts	45 dB	TTL	Specs Drawing	Quote

The 50 Ohm medium power solid-state RF switch models listed in the table are only our online models. If you can't find a model in the table that fits your exact 50 Ohm high power solid-state RF switch requirement, please contact JFW. We do not charge NRE's for new RF switch models. We pride ourselves in the ability to offer custom medium power RF switch models with the same pricing and delivery as our catalog medium power RF switch models.
Send in a request with a list of your required RF specifications and RF input power requirements and JFW will design a medium power solid-state RF switch model that meets your specific requirements.

Common solid-state RF Switch Terminology...
Reflective:	Switch ports are high impedance (open) when ports are turned off.
Absorptive:	Ports that are turned off are internally terminated with the proper impedance. (i.e. 75 Ohm impedance models are internally terminated with 75 Ohms.)
Self-terminating:	This term is used interchangeably with “absorptive”. Ports that are turned off are internally terminated with the proper impedance. (i.e. 75 Ohm impedance models are internally terminated with 75 Ohms.)
Hot Switching:	The switch changes state while a RF signal is still being applied to the switch.
Cold Switching:	No RF signal is applied to the RF switch while the RF switch is changes states.
Switching Speed:	Port turning ON = 50% TTL control to 90% of the RF signal. Port turning OFF = 50% TTL control to 10% of the RF signal.
Rise Time:	Port turning ON = 10% of the RF signal to 90% of the RF signal.
Fall Time:	Port turning OFF = 90% of the RF signal to 10% of the RF signal.

Home | Site Map | Terms and Conditions | JFW Print Logos | Contact_JFW