Terminations and Mismatch Loads
JFW offers terminations and mismatched loads with 50 Ohm or 75 Ohm impedance. Terminations are used to properly terminate a port matching the system impedance to prevent RF signal reflections. Mismatch loads are a specialized type of termination that purposely mismatches the system impedance to create RF signal reflections. Mismatch loads are often used in test setups for amplifiers to test the ability to handle specific reflected power levels.
50 Ohm Models
75 Ohm Models
- Display 15 Products per page
-
50 Ohm Terminations and Mismatch Loads (0.5 to 2 Watts) (20)
Terminations & Mismatch Loads (0.5 to 2 Watts)
JFW's online 50 Ohm Low power termination and mismatch load models are listed in the table below. JFW has been designing, manufacturing, and delivering quality terminations and mismatch loads for over 30 years. Our mismatch loads allow you to select the impedance mismatch your RF testing requires.Termination
The terminations listed in the model table are all 50 Ohm impedance. Terminations are used to properly terminate a port in the matching impedance to prevent RF signal reflections.Mismatch Load
The mismatch loads in the model table have model numbers that end with -XXX. The -XXX is used to specify the mismatch value. For example, JFW model #50T-464-2.0 SMA M is a 2.0:1 mismatch load (i.e. 100 Ohms) with a 50 Ohm SMA male connector. Frequently Asked Questions For your specific application, please contact JFW or use our Inquiry Form. [lt id="92"] If you have specific mechanical restrictions, RF specifications, or required unit screening, please contact us. JFW does not charge NRE’s for new termination models. We pride ourselves in the ability to offer custom models with pricing in-line with our catalog models. -
50 Ohm Terminations and Mismatch Loads (5 to 50 Watts) (31)
Terminations & Mismatch Loads (5 to 50 Watts)
JFW's online 50 Ohm medium power termination and mismatch load models are listed in the table below. JFW has been designing, manufacturing, and delivering quality terminations and mismatch loads for over 30 years. Our mismatch loads allow you to select the impedance mismatch your RF testing requires.Termination
The terminations listed in the model table are all 50 Ohm impedance. Terminations are used to properly terminate a port in the matching impedance to prevent RF signal reflections.Mismatch Load
The mismatch loads in the model table have model numbers that end with -XXX. The -XXX is used to specify the mismatch value. For example, JFW model #50T-034-3.0 BNC M is a 3.0:1 mismatch load (i.e. 150 Ohms) with a 50 Ohm BNC male connector. Frequently Asked Questions Click the column headers to sort by specifications. For your specific application, please contact JFW or use our Inquiry Form. [lt id="91"] If you have specific mechanical restrictions, RF specifications, or required unit screening, please contact us. JFW does not charge NRE’s for new termination models. We pride ourselves in the ability to offer custom models with pricing in-line with our catalog models. -
50 Ohm Terminations and Mismatch Loads (75 to 1000 Watts) (25)
Terminations & Mismatch Loads (75 to 1000 Watts)
JFW's online 50 Ohm high power termination and mismatch load models are listed in the table below. JFW has been designing, manufacturing, and delivering quality terminations and mismatch loads for over 30 years. Our mismatch loads allow you to select the impedance mismatch your RF testing requires.Termination
The terminations listed in the model table are all 50 Ohm impedance. Terminations are used to properly terminate a port in the matching impedance to prevent RF signal reflections.Mismatch Load
The mismatch loads in the model table have model numbers that end with -XXX. The -XXX is used to specify the mismatch value. For example, JFW model #50T-032-5.0 N M is a 5.0:1 mismatch load (i.e. 250 Ohms) with a 50 Ohm N male connector. Frequently Asked Questions For your specific application, please contact JFW or use our Inquiry Form. [lt id="56"] If you have specific mechanical restrictions, RF specifications, or required unit screening, please contact us. JFW does not charge NRE's for new termination models. We pride ourselves in the ability to offer custom models with pricing in-line with our catalog models. -
75 Ohm Terminations (10)
75 Ohm Termination and Mismatch Load
JFW’s online 75 Ohm Low power termination and mismatch load models are listed in the table below. JFW has been designing, manufacturing, and delivering quality terminations and mismatch loads for over 30 years. Our mismatch loads allow you to select the impedance mismatch your RF testing requires.Termination
The terminations listed in the model table are all 75 Ohm impedance. Terminations are used to properly terminate a port in the matching impedance to prevent RF signal reflections.Mismatch Load
The mismatch loads in the model table have model numbers that end with -XXX. The -XXX is used to specify the mismatch value. For example, JFW model #75T-059-2.0 BNC M is a 2.0:1 mismatch load (i.e. 150 Ohms) with a 75 Ohm BNC male connector. Frequently Asked Questions For your application, please contact JFW or use our Inquiry Form. [lt id="77"]