News - JFW Industries

April 6, 2017

Our Drafting Department has created a library of 3D models…

January 21, 2017

These two new series of Ethernet-controlled RF attenuator systems…

50Ω to 75Ω Impedance Matching Transformer | 5-2200 MHzMay 16, 2024 - 10:04 am
JFW model 57ZTT-2.2G is a coaxial impedance matching transformer. It operates 5-2200MHz. On the 50Ω side it is available with either BNC, N or SMA connectors. On the 75Ω side it is available with BNC, F or N connectors. This matching transformer allows you to connect a 50Ω device to a 75Ω device and have […]
2Way, 4Way, 8Way models for satellite communication signal routing | 1-18GHzApril 29, 2024 - 2:19 pm
JFW has added several new power divider/combiner models to our website. These 2Way, 4Way and 8Way models cover several common satellite communication bands. All of these models are 50 Ohm reactive design (i.e. Wilkinson design) with SMA female connectors. These models are ideal for fan-in/fan-out signal routing due to their low through path loss and […]
48 Attenuator Assembly for WiFi 6 Testing | 200-7125MHzApril 29, 2024 - 11:33 am
JFW model 50PA-1252 SMA is a 50 Ohm attenuator assembly that can be used to test WiFi 6 devices. The attenuator assembly operates 200-7125MHz and contains 48 individually controlled step attenuators with attenuation range 0-95dB x 1dB steps. Each attenuator has two ports that are both cabled to the rear panel with SMA female connectors. The […]