Matrix Switches
JFW offers blocking and non-blocking matrix switches. They are available with 50 Ohm or 75 Ohm impedance. The Ethernet/Serial models run our latest generation 3.x.x firmware that features easy to use ASCII formatted commands. Our RF Matrix Guide steps through the advantages for each matrix type.
Blocking Matrix Switch:
- Constructed with RF switches on both halves of the matrix
- An output port can be connected to only one input port
- The blocking configuration offers low insertion loss and high port-to-port isolation
Non-Blocking Matrix Switch:
- Constructed with power dividers on input ports and RF switches on output ports
- An input port can be connected to multiple output ports simultaneously
- The non-blocking configuration offers additional active RF paths but has higher thru loss than blocking design.
- Display 15 Products per page
-
50MS-465 | 4×4 Non-Blocking Matrix Switch
JFW Model #: 50MS-465
Impedance: 50 Ohm
Configuration: 4 x 4 Non-Blocking Matrix Switch
Frequency Range: 1-18 GHz
Switch Type: Solid-state
Unused IN Ports: Absorptive
Unused OUT Ports: Reflective
RF Input Power: +30 dBm
RF Connectors: N or SMA
Documentation: Data Sheet | Drawing | Diagram -
50MS-463 | 8×8 Non-Blocking Matrix Switch
JFW Model #: 50MS-463
Impedance: 50 Ohm
Configuration: 8 x 8 Non-Blocking Matrix Switch
Frequency Range: 500-8400 MHz
Switch Type: Solid-state
Unused Ports: Absorptive
RF Input Power: +30 dBm
RF Connectors: N or SMA
Documentation: Data Sheet | Drawing | Diagram -
50MS-462 | 4×4 Non-Blocking Matrix Switch
JFW Model #: 50MS-462
Impedance: 50 Ohm
Configuration: 4 x 4 Non-Blocking Matrix Switch
Frequency Range: 500-8400 MHz
Switch Type: Solid-state
Unused Ports: Absorptive
RF Input Power: +30 dBm
RF Connectors: N or SMA
Documentation: Data Sheet | Drawing | Diagram -
50MS-460 | 4×4 Non-Blocking Matrix Switch
JFW Model #: 50MS-460
Impedance: 50 Ohm
Configuration: 4 x 4 Non-Blocking Matrix Switch
Frequency Range: 350-6000 MHz
Switch Type: Solid-state
Unused Ports: Absorptive
RF Input Power: +30 dBm
RF Connectors: N or SMA
Documentation: Data Sheet | Drawing | Diagram -
50MS-437 | 8×8 Non-Blocking Matrix Switch
JFW Model #: 50MS-437
Impedance: 50 Ohm
Configuration: 8 x 8 Non-Blocking Matrix Switch
Frequency Range: 1-18 GHz
Switch Type: Solid-state
Unused IN Ports: Absorptive
Unused OUT Ports: Reflective
RF Input Power: +30 dBm
RF Connectors: N or SMA
Documentation: Data Sheet | Drawing | Diagram -
50MS-436 | 4×8 Non-Blocking Matrix Switch
JFW Model #: 50MS-436
Impedance: 50 Ohm
Configuration: 4 x 8 Non-Blocking Matrix Switch
Frequency Range: 1-18 GHz
Switch Type: Solid-state
Unused IN Ports: Absorptive
Unused OUT Ports: Reflective
RF Input Power: +30 dBm
RF Connectors: N or SMA
Documentation: Data Sheet | Drawing | Diagram -
50MS-435 | 4×6 Non-Blocking Matrix Switch
JFW Model #: 50MS-435
Impedance: 50 Ohm
Configuration: 4 x 6 Non-Blocking Matrix Switch
Frequency Range: 1-18 GHz
Switch Type: Solid-state
Unused IN Ports: Absorptive
Unused OUT Ports: Reflective
RF Input Power: +30 dBm
RF Connectors: N or SMA
Documentation: Data Sheet | Drawing | Diagram -
50MS-455 | 4×4 Blocking Matrix Switch
JFW Model #: 50MS-455
Impedance: 50 Ohm
Configuration: 4 x 4 Blocking Matrix Switch
Frequency Range: DC-26.5 GHz
Switch Type: Electro-mechanical
Unused Ports: Absorptive (i.e. self-terminating)
RF Input Power: 50 Watts (cold switch)
RF Connectors: 3.5mm Female
Documentation: Data Sheet | Drawing | Diagram -
75MS-051 | 4×8 Non-Blocking Matrix Switch
JFW Model #: 75MS-051
Impedance: 75 Ohm
Configuration: 4 x 8 Non-Blocking Matrix Switch
Frequency Range: 5-1218 MHz
Switch Type: Electro-mechanical
Unused Ports: Absorptive
RF Input Power: +20 dBm
RF Connectors: F Female
Documentation: Data Sheet | Drawing | Diagram -
75MS-050 | 4×4 Non-Blocking Matrix Switch
JFW Model #: 75MS-050
Impedance: 75 Ohm
Configuration: 4 x 4 Non-Blocking Matrix Switch
Frequency Range: 5-1218 MHz
Switch Type: Electro-mechanical
Unused Ports: Absorptive
RF Input Power: +20 dBm
RF Connectors: F Female
Documentation: Data Sheet | Drawing | Diagram -
75MS-040 | 4×4 Non-Blocking Matrix Switch
JFW Model #: 75MS-040
Impedance: 75 Ohm
Configuration: 4 x 4 Non-Blocking Matrix Switch
Frequency Range: 5-2150 MHz
Switch Type: Solid-state
Unused Ports: Absorptive
RF Input Power: +10 dBm
RF Connectors: F Female
Documentation: Data Sheet | Drawing | Diagram -
50MS-421 | 8×8 Blocking Matrix Switch
JFW Model #: 50MS-421
Impedance: 50 Ohm
Configuration: 8 x 8 Blocking Matrix Switch
Frequency Range: 20-1000 MHz
Switch Type: Solid-state
Unused Ports: Absorptive
RF Input Power: +20 dBm
Remote Control: Ethernet and RS-232
RF Connectors: BNC, N or SMA Female
Documentation: Data Sheet | Drawing | Diagram -
50MS-382 | 6×6 Blocking Matrix Switch
JFW Model #: 50MS-382
Impedance: 50 Ohm
Configuration: 6 x 6 Blocking Matrix Switch
Frequency Range: DC-18 GHz
Switch Type: Electro-mechanical
Unused Ports: Absorptive
RF Input Power: 50 Watts (cold switch)
Remote Control: Ethernet and RS-232
RF Connectors: N or SMA Female
Documentation: Data Sheet | Drawing | Diagram -
50MS-403 | 8×8 Blocking Matrix Switch
JFW Model #: 50MS-403
Impedance: 50 Ohm
Configuration: 8 x 8 Blocking Matrix Switch
Frequency Range: 20-3000 MHz
Switch Type: Solid-state
Unused Ports: Absorptive
RF Input Power: +20 dBm
Remote Control: Ethernet and RS-232
RF Connectors: N or SMA Female
Documentation: Data Sheet | Drawing | Diagram -
75MS-052 | 8×8 Non-Blocking Matrix Switch
JFW Model #: 75MS-052
Impedance: 75 Ohm
Configuration: 8 x 8 Non-Blocking Matrix Switch
Frequency Range: 5-1218 MHz
Switch Type: Electro-mechanical
Unused Ports: Absorptive
RF Input Power: +20 dBm
RF Connectors: F Female
Documentation: Data Sheet | Drawing | Diagram