RF Products for 5G Wireless Testing
The models listed below are several models that highlight our 5G product offering. These models are also located on our standard sortable product tables.
The 5th generation of wireless mobile systems is being actively researched around the world by a multitude of companies. Its high data rates will enable it to be much more than just the next generation of mobile networks. It appears that 5G deployment will include frequency bands from sub-1 GHz to 6 GHz for mobile coverage and up to 50 GHz for the highest point to point transmission speeds.
RF Test Systems for 5G Wireless Testing
JFW Model # | Impedance | Config | dB Total | dB Step | Frequency Start | Frequency Stop | Control | RF Connectors |
---|---|---|---|---|---|---|---|---|
50MS-367 | 50 Ohms | 4 x 4 Blocking RF Matrix Switch | 0 MHz (DC) | 40 GHz | 2.92 mm | |||
50PA-1002-XX | 50 Ohms | 1 to 16 Attenuators | 31 dB | 1 dB | 100 MHz | 40 GHz | Manual, Ethernet, RS-232 | 2.92 mm |
50PA-1019-XX | 50 Ohms | 1 to 16 Attenuators | 62 dB | 1 dB | 100 MHz | 40 GHz | Manual, Ethernet, RS-232 | 2.92 mm |
50BA-031-31 | 50 Ohms | 2 Attenuators (Solid-State) | 31 dB | 1 dB | 100 MHz | 18 GHz | Manual, Ethernet, RS-232 | SMA |
50BA-032-31 | 50 Ohms | 4 Attenuators (Solid-State) | 31 dB | 1 dB | 100 MHz | 18 GHz | Manual, Ethernet, RS-232 | SMA |
RF Switches for 5G Wireless Testing
JFW Model # | Impedance | Switch Config | Switch Type | Frequency Start | Frequency Stop | Switching Speed | Control | RF Connectors |
---|---|---|---|---|---|---|---|---|
50S-1634+XX | 50 Ohms | 1P6T | Normally Open, Reflective | 0 MHz (DC) | 40 GHz | 20 mS | +12, +15, +24, +28 Vdc | 2.9 mm |
50S-1772+XX | 50 Ohms | 1P2T | Failsafe, Reflective | 0 MHz (DC) | 40 GHz | 15 mS | +12, +15, +24, +28 Vdc | 2.9 mm |
50S-1773+XX | 50 Ohms | 1P4T | Normally Open, Reflective | 0 MHz (DC) | 40 GHz | 20 mS | +12, +15, +24, +28 Vdc | 2.9 mm |
Programmable Attenuators for 5G Wireless Testing
JFW Model # | Impedance | dB Total | dB Step | Frequency Start | Frequency Stop | Switching Speed | Control | RF Connectors |
---|---|---|---|---|---|---|---|---|
50P-2101 | 50 Ohms | 63.5 dB | 0.5 dB | 100 MHz | 18000 MHz | 1 uS | TTL | SMA |
50P-2103 | 50 Ohms | 63 dB | 0.5 dB | 100 MHz | 18 GHz | 1 uS | USB | SMA |
50P-2072 | 50 Ohms | 31 dB | 1 dB | 100 MHz | 40 GHz | 0.5 uS | TTL | 2.9 mm |
Fixed Attenuators for 5G Wireless Testing
JFW Model # | Impedance | Frequency Start | Frequency Stop | RF Input Power | Attenuation Values | RF Connectors |
---|---|---|---|---|---|---|
50HFAR-XXX | 50 Ohms | 0 MHz (DC) | 40 GHz | 2 Watts | 3, 6, 10, 20, 30 dB | 2.9 mm |
50HFAH-XXX | 50 Ohms | 0 MHz (DC) | 40 GHz | 0.5 Watts | 1, 2, 3, 6, 10, 20, 30 dB | 2.9 mm |
50HFAT-XXX | 50 Ohms | 0 MHz (DC) | 50 GHZ | 0.5 Watts | 3, 6, 10, 20, 30 dB | 2.4 mm |
DC Blocks for 5G Wireless Testing
JFW Model # | Impedance | Type | Frequency Start | Frequency Stop | Breakdown Voltage | RF Connectors |
---|---|---|---|---|---|---|
50DB-076 | 50 Ohms | Inner | 100 MHz | 50 GHz | 75 Volts | 2.4 mm |
50DB-077 | 50 Ohms | Inner/Outer | 10 MHz | 40 GHz | 200 Volts | 2.9 mm |
- Display 15 Products per page
-
USB Attenuator 0.1-18 GHz 0-63dB x 0.5dB | 50P-2103
JFW Model #: 50P-2103
Type: Solid-State Programmable Attenuator
Control: USB controlled
Impedance: 50 Ohm
dB Total: 63 dB
dB Step: 0.5 dB
Frequency Start: 100 MHz
Frequency Stop: 18 GHz
Switching Speed: 1 uS
RF Input Power: +24 dBm (Input), +15 dBm (Output)
RF Connectors: SMA
Documentation: Data Sheet | Drawing -
50MS-380 | 4×4 Blocking Matrix Switch
JFW Model #: 50MS-380
Impedance: 50 Ohm
Configuration: 4 x 4 Blocking Matrix Switch
Frequency Range: DC-18 GHz
Switch Type: Electro-mechanical
Unused Ports: Absorptive
RF Input Power: 50 Watts (cold switch)
RF Connectors: SMA Female
Documentation: Data Sheet | Drawing | Diagram -
Programmable Attenuator 0.1-40 GHz 0-31dB x 1dB | 50P-2072
JFW Model #: 50P-2072
Type: Solid-state programmable attenuator
Impedance: 50 Ohm
dB Total: 31 dB
dB Step: 1 dB
Frequency Start: 100 MHz
Frequency Stop: 40 GHz
Switching Speed: 0.5 uS
RF Input Power: +20 dBm
Control: TTL
RF Connectors: 2.9 mm
Documentation: Data Sheet | Drawing -
1P4T RF Switch DC-40 GHz | 50S-1773+XX 2.9MM
JFW Model #: 50S-1773+XX
Impedance: 50 Ohm
Switch Configuration: 1P4T
Switch Type: Normally Open, Reflective
Frequency Range: DC-40 GHz
Switching Speed: 20 mS
RF Connector: 2.9 mm female
Control Voltage: +12. +15, +24, +28 Vdc
Documentation: Data Sheet |Drawing -
50MS-382 | 6×6 Blocking Matrix Switch
JFW Model #: 50MS-382
Impedance: 50 Ohm
Configuration: 6 x 6 Blocking Matrix Switch
Frequency Range: DC-18 GHz
Switch Type: Electro-mechanical
Unused Ports: Absorptive
RF Input Power: 50 Watts (cold switch)
Remote Control: Ethernet and RS-232
RF Connectors: N or SMA Female
Documentation: Data Sheet | Drawing | Diagram -
1P6T RF Switch DC-40 GHz | 50S-1634+XX 2.9MM
JFW Model #: 50S-1634+XX
Impedance: 50 Ohm
Switch Configuration: 1P6T
Switch Type: Normally Open, Reflective
Frequency Range: DC-40 GHz
Switching Speed: 20 mS
RF Connector: 2.9 mm female
Control Voltage: +12. +15, +24, +28 Vdc
Documentation: Data Sheet |Drawing -
1P2T RF Switch DC-40 GHz | 50S-1772+XX 2.9MM
JFW Model #: 50S-1772+XX
Impedance: 50 Ohm
Switch Configuration: 1P2T
Switch Type: Failsafe, Reflective
Frequency Range: DC-40 GHz
Switching Speed: 15 mS
RF Connector: 2.9 mm female
Control Voltage: +12. +15, +24, +28 Vdc
Documentation: Data Sheet |Drawing -
Assembly with 1-16 Attenuators 0.1-40 GHz | 0-62dB x 1dB | 50PA-1019-XX
JFW Model #: 50PA-1019-XX
Impedance: 50 Ohms
Configuration: Available with 1 to 16 Attenuators
Attenuator Type: Solid-state step attenuators
dB Total: 62 dB
dB Step: 1 dB
Frequency Start: 100 MHz
Frequency Stop: 40 GHz
RF Connector: 2.92 mm Female
Manual Control: Display and Keypad
Remote Control: Ethernet, RS-232
Enclosure Type: 19 inch rack mount
Documentation: Data Sheet | Drawing -
50MS-455 | 4×4 Blocking Matrix Switch
JFW Model #: 50MS-455
Impedance: 50 Ohm
Configuration: 4 x 4 Blocking Matrix Switch
Frequency Range: DC-26.5 GHz
Switch Type: Electro-mechanical
Unused Ports: Absorptive (i.e. self-terminating)
RF Input Power: 50 Watts (cold switch)
RF Connectors: 3.5mm Female
Documentation: Data Sheet | Drawing | Diagram -
50MS-367 | 4×4 Blocking Matrix Switch
JFW Model #: 50MS-367
Impedance: 50 Ohm
Configuration: 4 x 4 Blocking Matrix Switch
Frequency Range: DC-40 GHz
Switch Type: Electro-mechanical
Unused Ports: Absorptive
RF Input Power: 8 Watts
RF Connectors: 2.92 mm
Documentation: Data Sheet | Drawing | Diagram -
50MS-421 | 8×8 Blocking Matrix Switch
JFW Model #: 50MS-421
Impedance: 50 Ohm
Configuration: 8 x 8 Blocking Matrix Switch
Frequency Range: 20-1000 MHz
Switch Type: Solid-state
Unused Ports: Absorptive
RF Input Power: +20 dBm
Remote Control: Ethernet and RS-232
RF Connectors: BNC, N or SMA Female
Documentation: Data Sheet | Drawing | Diagram -
50MS-404 | 8×8 Blocking Matrix Switch
JFW Model #: 50MS-404
Impedance: 50 Ohm
Configuration: 8 x 8 Blocking Matrix Switch
Frequency Range: DC-18 GHz
Switch Type: Electro-mechanical
Unused Ports: Absorptive
RF Input Power: 30 Watts (cold switch)
Remote Control: Ethernet and RS-232
RF Connectors: N or SMA Female
Documentation: Data Sheet | Drawing | Diagram -
Assembly with 1-16 Attenuators 0.1-40 GHz | 0-31dB x 1dB | 50PA-1002-XX
JFW Model #: 50PA-1002-XX
Impedance: 50 Ohms
Configuration: Available with 1 to 16 Attenuators
Attenuator Type: Solid-state step attenuators
dB Total: 31 dB
dB Step: 1 dB
Frequency Start: 100 MHz
Frequency Stop: 40 GHz
Manual Control: Display and Keypad
Remote Control: Ethernet, RS-232
Enclosure Type: 19 inch rack mount
Documentation: Data Sheet | Drawing -
50MS-403 | 8×8 Blocking Matrix Switch
JFW Model #: 50MS-403
Impedance: 50 Ohm
Configuration: 8 x 8 Blocking Matrix Switch
Frequency Range: 20-3000 MHz
Switch Type: Solid-state
Unused Ports: Absorptive
RF Input Power: +20 dBm
Remote Control: Ethernet and RS-232
RF Connectors: N or SMA Female
Documentation: Data Sheet | Drawing | Diagram -
50MS-345 | 4×8 Blocking Matrix Switch
JFW Model #: 50MS-345
Impedance: 50 Ohm
Configuration: 4 x 8 Blocking Matrix Switch
Frequency Range: DC-18 GHz
Switch Type: Electro-mechanical
Unused Ports: Absorptive
RF Input Power: 50 Watts (cold switch)
Remote Control: Ethernet and RS-232
RF Connectors: SMA Female
Documentation: Data Sheet | Drawing | Diagram